EPEVER

• Configured as a balcony power station
• Cost-effective compared to conventional power stations
• AC-Coupling with other micro-inverters
• Capacity expansion through the use of multiple battery packs
• Maximum continuous output power (On-Grid connection): 800W
• Maximum continuous output power (Off-Grid and Battery connection): 1200W
• LiFePO4 solar battery storage with an input voltage of 51.2V
• 5000 life cycles at 0.5C, 25°C, 80% DOD

• 2048Wh Lithium battery
• Superfast Charging: Fully charged in 1.2 hours
• Up to 1200W of PV-Input Power (60V; 20A)
• Power up to 14 devices simultaneously
• 4 x 3600W AC Output Power (5400W Peak Output Power)
• Simultaneous charging and discharging
• LCD Screen and ambient lighting
• Versatile Applications: RV camping and outdoor, Aerial photography, Home and emergency backup power etc.

• 2048Wh Lithium battery
• Superfast Charging: Fully charged in 1.2 hours
• Up to 1200W of PV-Input Power (60V; 20A)
• Power up to 14 devices simultaneously
• 4 x 3600W AC Output Power (5400W Peak Output Power)
• Simultaneous charging and discharging
• LCD Screen and ambient lighting
• Versatile Applications: RV camping and outdoor, Aerial photography, Home and emergency backup power etc.

• Wall-mountable
• A-Grade LiFePO4 cells
• Integrated BMS and seamless Communication
• LCD-Display for real-time monitoring
• Over 5000 cycles at 80% DOD
• Up to 8 units can be connected in parallel
• Maximum discharge current: 100A for 30 minutes
• Nominal voltage: 51.2V
• Battery terminal clamp: Quick-Connector Terminal

• Wall-mountable
• A-Grade LiFePO4 cells
• Integrated BMS and seamless Communication
• LCD-Display for real-time monitoring
• Over 5000 cycles at 80% DOD
• Up to 8 units can be connected in parallel
• Maximum discharge current: 100A for 30 minutes
• Nominal voltage: 51.2V
• Battery terminal clamp: Quick-Connector Terminal

• Wall-mountable
• A-Grade LiFePO4 cells
• Integrated BMS
• Seamless Communication
• Over 5000 cycles at 80% DOD
• Up to 8 units can be connected in parallel
• Maximum discharge current: 100A for 30 minutes
• Nominal voltage: 51.2V
• Battery terminal clamp: Quick-Connector Terminal

• Wall-mountable
• A-Grade LiFePO4 cells
• Integrated BMS
• Seamless Communication
• Over 5000 cycles at 80% DOD
• Up to 8 units can be connected in parallel
• Maximum discharge current: 100A for 30 minutes
• Nominal voltage: 51.2V
• Battery terminal clamp: Quick-Connector Terminal

• New type of all-digital intelligent energy storage and management Inverter/charger
• Advanced all-digital control technology for AC-DC charging modules
• MPPT technology, Max. tracking efficiency 99.5 %, Max. DC-DC conversion efficiency 98.5 %
• SPWM technology, with high efficiency up to 95 %
• With the function of Utility & Solar charging ratio selection, and total charging current setting
• Battery Type: AGM, GEL, FLD, USER (do not support Lithium battery)
• Four charging mode and two output mode
• RS485 isolated communication interface with standard Modbus protocol

• A-Grade LiFePO4 cells
• Integrated BMS
• Seamless Communication
• Up to 8 units can be connected in parallel
• Nominal voltage: 48V/51.2V
• Battery terminal clamp: M6

• A-Grade LiFePO4 cells
• Integrated BMS
• Seamless Communication
• Up to 8 units can be connected in parallel
• Nominal voltage: 48V/51.2V
• Battery terminal clamp: M6

• Supports the battery mode or non-battery mode
• Surge current and reverse connection protections to support the lithium battery system perfectly
• High tracking efficiency of MPPT no less than 99.5%
• Advanced SPWM technology and pure sine wave output
• Three charging modes: Solar only, Solar priority, Utility & Solar
• Two AC output modes: Utility priority and Inverter priority

• Supports the battery mode or non-battery mode
• Surge current and reverse connection protections to support the lithium battery system perfectly
• High tracking efficiency of MPPT no less than 99.5%
• Advanced SPWM technology and pure sine wave output
• Three charging modes: Solar only, Solar priority, Utility & Solar
• Two AC output modes: Utility priority and Inverter priority

• Rated Power: 3500W/5500W, Peak Power (3s): 7000W/8500W
• Supports Battery Mode and AC Mode Operation
• Scalable Power: Parallel operation of up to 12 units
• Advanced MPPT Technology achieving over 99.5% tracking efficiency
• Advanced SPWM Technology with pure sine wave output

• Rated Power: 5500W, Peak Power (3s): 8500W
• Battery Rated Voltage and Max Current: 48VDC; 100A
• Max PV Power and PV Open Circuit Voltage: 6000W; 500V
• Supports Battery Mode and AC Mode Operation
• Scalable Power: Parallel operation of up to 12 units
• Advanced MPPT Technology achieving over 99.5% tracking efficiency
• Advanced SPWM Technology with pure sine wave output

• Built with classic 125mm (5 inch) monocrystalline cells
• 90cm long 4mm² solar cable with MC4 connector
• Two integrated bypass diode - minimized power loss during shading
• TÜV certified
• Surface made of tempered toughened solar glass with weatherproof coating
• Unique extra robust frame in anodized aluminum
• High tracking efficiency of MPPT no less than 99.5%

• Rated Power: 3500W, Peak Power (3s): 7000W
• Battery Rated Voltage and Max Current: 48VDC; 60A
• Max PV Power and PV Open Circuit Voltage: 4000W; 500V
• Supports Battery Mode and AC Mode Operation
• Scalable Power: Parallel operation of up to 12 units
• Advanced MPPT Technology achieving over 99.5% tracking efficiency
• Advanced SPWM Technology with pure sine wave output

• 2048Wh Lithium battery
• Superfast Charging: Fully charged in 2.1 hours
• Up to 1000W of PV-Input Power (60V; 20A)
• Versatile Applications: RV camping and outdoor, Aerial photography, Home and emergency backup power etc.

• New type of all-digital intelligent energy storage and management Inverter/charger
• Advanced all-digital control technology for AC-DC charging modules
• MPPT technology, Max. tracking efficiency 99.5 %, Max. DC-DC conversion efficiency 98.5 %
• SPWM technology, with high efficiency up to 95 %
• With the function of Utility & Solar charging ratio selection, and total charging current setting
• Battery Type: AGM, GEL, FLD, USER (do not support Lithium battery)
• Four charging mode and two output mode
• RS485 isolated communication interface with standard Modbus protocol

• Ladestrom 100A; Max.PV-Leerlaufspannung: 150V; System Nennspannung:12/24/36/48VDC Auto
• Tracking-Wirkungsgrad von nicht weniger als 99,5%
• Maximale DC/DC Umwandlungseffizienz von 98,6%; Effizienz bei maximaler Belastung bis zu 98%.
• Unterstützende Batterietype: Blei-Säure-Batterie: AGM, GEL, Flooded, User; Lithiumbatterie (zusätzliche Zubehör Von EPEVER wie eBox-Wifi/Bluetooth, USB-RS485 Kabel sind für Parametereinstellung der Lithiumbatterie und USER erforderlich)

Achtung: !Was ist B-Ware?!

Die Artikel wurden von unseren Servicemitarbeitern technisch geprüft und gegebenenfalls repariert und unverpackt. Da es sich hierbei allerdings um Kundenretouren, Rückläufer und Restposten handelt, können optische Mängel (z.B. Kratzer, kleine Oberflächenschäden) nicht ausgeschlossen werden. Die Artikel befinden sich in einem voll funktionsfähigen Zustand und sind sofort einsatzbereit.

Für B-Waren gilt die Gewährleistung wie A-Waren, Geld Erstattung ist aber ausgeschlossen. Einen Gutschein erstatten wir gerne.

Beschreibung der Beschädigung: Montage Gebrauchsspuren (MGS)/Kratze/ Schraubfehler

Online lesen und herunterladen:

Betriebsanleitung - MPPT Solar Laderegler Tracer AN (50A-100A)

• Ladestrom 80A; Max.PV-Leerlaufspannung: 200V; System Nennspannung:12/24/36/48VDC Auto
• Tracking-Wirkungsgrad von nicht weniger als 99,5%
• Maximale DC/DC Umwandlungseffizienz von 98,6%; Effizienz bei maximaler Belastung bis zu 98%.
• Unterstützende Batterietype: Blei-Säure-Batterie: AGM, GEL, Flooded, User; Lithiumbatterie (zusätzliche Zubehör Von EPEVER wie eBox-Wifi/Bluetooth, USB-RS485 Kabel sind für Parametereinstellung der Lithiumbatterie und USER erforderlich

Achtung: !Was ist B-Ware?!

Die Artikel wurden von unseren Servicemitarbeitern technisch geprüft und gegebenenfalls repariert und unverpackt. Da es sich hierbei allerdings um Kundenretouren, Rückläufer und Restposten handelt, können optische Mängel (z.B. Kratzer, kleine Oberflächenschäden) nicht ausgeschlossen werden. Die Artikel befinden sich in einem voll funktionsfähigen Zustand und sind sofort einsatzbereit.

Für B-Waren gilt die Gewährleistung wie A-Waren, Geld Erstattung ist aber ausgeschlossen. Einen Gutschein erstatten wir gerne.

Beschreibung der Beschädigung: Montage Gebrauchsspuren (MGS)

Online lesen und herunterladen:

Betriebsanleitung – MPPT Solar Laderegler Tracer AN (50A-100A)

• 180 ° rotatable LCD display
• Smartphone apps, PC software remote control
• Output power factor up to 1
• Input surge current suppression for lithium battery (LiFePo4) system
• The metal enclosure of the inverter must be grounded

• 180 ° rotatable LCD display
• Smartphone apps, PC software remote control
• Output power factor up to 1
• Input surge current suppression for lithium battery (LiFePo4) system
• The metal enclosure of the inverter must be grounded

• Charging current 50A/60A/75A/80A/100A; Max Open Circuit Voltage: 200V; System nominal voltage: 12/24/48VDC Auto
• Tracking efficiency of no less than 99.5%
• Maximum DC / DC conversion efficiency of 98.1%; Efficiency at maximum load up to 98%.
• Support battery types: Lead-acid battery: AGM, GEL, Flooded, User; Lithium battery (additional accessories from EPEVER such as Wifi / Bluetooth-Adapter, USB-RS485 cable are required for parameter settings of the lithium battery und USER)

• Charging current 50A/60A/75A780A/100A; Max Open Circuit Voltage: 200V; System nominal voltage: 12/24/48VDC Auto
• Tracking efficiency of no less than 99.5%
• Maximum DC / DC conversion efficiency of 98.1%; Efficiency at maximum load up to 98%.
• Support battery types: Lead-acid battery: AGM, GEL, Flooded, User; Lithium battery (additional accessories from EPEVER such as Wifi / Bluetooth-Adapter, USB-RS485 cable are required for parameter settings of the lithium battery und USER)

• 180 ° rotatable LCD display
• Smartphone apps, PC software remote control
• Output power factor up to 1
• Input surge current suppression for lithium battery (LiFePo4) system
• The metal enclosure of the inverter must be grounded

• 180 ° rotatable LCD display
• Smartphone apps, PC software remote control
• Output power factor up to 1
• Input surge current suppression for lithium battery (LiFePo4) system
• The metal enclosure of the inverter must be grounded

• 180 ° rotatable LCD display
• Smartphone apps, PC software remote control
• Output power factor up to 1
• Input surge current suppression for lithium battery (LiFePo4) system
• The metal enclosure of the inverter must be grounded

• A-Grade LiFePO4 cells
• Integrated Bluetooth and BMS
• Integrated self-heating
• Over 4000 cycles at 80% DOD
• Nominal voltage: 25.6V
• Battery terminal clamp: M8

• A-Grade LiFePO4 cells
• Integrated Bluetooth and BMS
• Integrated self-heating
• Over 4000 cycles at 80% DOD
• Nominal voltage: 25.6V
• Battery terminal clamp: M8

• 180 ° rotatable LCD display
• Smartphone apps, PC software remote control
• Output power factor up to 1
• Input surge current suppression for lithium battery (LiFePo4) system
• The metal enclosure of the inverter must be grounded